INOR IsoPAQ-611
1-channel Loop Powered Isolator for separation of 0(4)-20 mA signals
The input loop-powered isolator IsoPAQ-611 provides galvanic separation for 0(4)-20 mA standard signals while transferring the measurement signal to the output with high accuracy. It avoids interference voltage carry-over and suppresses parasitic noise. The very low drop voltage of 2.3 V and high accuracy make it the first choice in system design. Intelligent design avoiding highly integrated components gives extremely long service life and reliability without falsifying the measurement signal. No additional power supply is needed since auxiliary power is obtained from the input signal without distorting it, saving installation costs and increasing reliability.
Galvanic isolation across input and output
Protection against erroneous measurements due to parasitic voltages or ground loops
No power supply required; reduced wiring and no line influences
Extremely slim 6.2 mm casing with very low self-heating allows tight mounting
Protective separation acc. to EN 61140 protects service personnel and downstream devices against impermissibly high voltage
Maximum reliability, no maintenance costs
Technical specification
- Model
- INOR IsoPAQ-611
- Channels
- 1
- Signal
- 0(4)–20 mA
- Power supply
- Loop-powered
- Isolation
- 3 kV
- Accuracy
- ±0.1% FS
- Working voltage
- 600 VAC/DC
- Housing
- 6 mm line
Related products
Loop-powered isolators
Powered by the input signal, no external supply: isolation of 0(4)–20 mA signals.
| Photo | Model | Channels | Signal | Power supply | Isolation | Accuracy | Working voltage | Housing | Details |
|---|---|---|---|---|---|---|---|---|---|
| INOR IsoPAQ-611 | 1 | 0(4)–20 mA | Loop-powered | 3 kV | ±0.1% FS | 600 VAC/DC | 6 mm line | Details → | |
| INOR IsoPAQ-612 | 2 | 0(4)–20 mA | Loop-powered | 3 kV | ±0.1% FS | 600 VAC/DC | 6 mm line | Details → | |
| INOR IsoPAQ-21L | 1 | 0(4)–20 mA | Loop-powered | 4 kV | ±0.1% FS | 600 VAC/DC | Standard line | Details → | |
| INOR IsoPAQ-22L | 2 | 0(4)–20 mA | Loop-powered | 4 kV | ±0.1% FS | 600 VAC/DC | Standard line | Details → | |
| INOR Iso-PAQ-11L | 1 | 0(4)–20 mA | Loop-powered | Galvanic isolation | — | — | — | Details → | |
| INOR Iso-PAQ-12L | 2 | 0(4)–20 mA | Loop-powered | Galvanic isolation | — | — | — | Details → | |
| INOR Iso-PAQ-110L | 1 / 2 | 0(4)–20 mA | Loop-powered | 2.5 kV | ±0.15% FS | — | Compact line | Details → |
Can't find an exact match?
Tell us your temperature range, mounting and dimensions and our engineers will design it for you.